ELASTOSIL® N9111 KR RTV-1 SILICONE ADHESIVE

Product description
ELASTOSIL® N9111 KR is a one-component silicone adhesive with excellent adhesion properties which cures at room temperature under the influence of atmospheric moisture.

Special features
 Alkoxy curing system (Neutral)
 One component adhesive
 Excellent adhesion to various substrates without primer
 Stable and flexible from – 50 ℃ to + 200 ℃
 Non-slump
 Solvent-free

Application
ELASTOSIL® N9111 KR is intended for sealing, fixing and adhering electronic devices and components. It is a general purpose adhesive in FIPG and CIPG application for the electronics industry.

Processing
ELASTOSIL® N9111 KR can be readily dispensed from cartridge and bulk containers using conventional drum/pail pumps equipped with a high-pressure flexible fluid hose and extrusion gun.

 270 Kg Drum
 25 Kg Hobbock
 416 g Cartridge(300 ml)

Storage
ELASTOSIL® N9111 KR needs to be stored at or below 30°C in the original unopened containers.

The ‘Best use before end’ date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for
quality assurance reasons.

Safety notes
Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from WACKER subsidiaries or may be printed via WACKER website.

CREATING TOMORROW’S SOLUTION http://www.WACKER.com