ELASTOSIL® M 4601 A/B
Room Temperature Curing Silicone Rubber (RTV-2)
Pourable, addition-curing, two-component silicone rubber that vulcanizes
at room temperature.
Main application: Making shrink-free molds with excellent reproduction
accuracy.
Food contact (FDA/BfR compliant)
Properties
• Very good flow
• Low viscosity
• Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
• Medium Shore A hardness (approx. 28)
• High tear strength
• Excellent long-term stability of the mechanical properties of the cured rubber
• Outstanding resistance to common casting resins particularly polyurethane
Specific features
• Addition Curing
• BfR compliant
• FDA compliant
• Flowable
• Food-contact
• Low viscosity
• No chemical shrinkage
• Resistance against casting resins
• Two-component
Technical data
General Characteristics


Applications
• Automotive molding
• Composite molding
• Reproduction Molding
Application details
Due to the outstanding resistance to casting resins as well as the superior mechanical properties, ELASTOSIL® M 4601
A/B is especially suitable for all molds of models with extensive undercuts that are to be reproduced in casting resins.
As a low-Shore addition-curing RTV-2 silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL®
M 4601 A/B is also extremely suitable for casting all other common reproduction materials, particularly if absolutely
accurate copies of models with pronounced undercuts are required.
Processing
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones
Material and Processing Guidelines”.
Important note:
The platinum catalyst is in component B.
Caution:
A and B components may only be used together if they have the same batch number.
Packaging and storage
Storage
The ‘Best use before end’ date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case
however, the properties required for the intended use must be checked for quality assurance reasons.
Safety notes
Comprehensive instructions are given in the corresponding Material Safety Data Sheets. They are available on request from
WACKER subsidiaries or may be printed via WACKER web site www.wacker.com.